Artículos 0
2286
 

2286

 

Signal controller

 

  • Multiple functions
  • Programmable from front
  • 3-digit LED display
  • Analog or Pt100 input
  • Relay outputs
  • Max. 50% offset
  1. Overview

  2. Technical details

  3. Accessories


Advanced features

  • Programmed via the user interface which consists of a 3-digit display and 3 function keys in the front panel.

Application

  • PID on/off controller, PI step controller or 3-band controller with analog or Pt100 input.
  • As trip amplifier with setpoint adjustment through external current / voltage signal with neutral zone surrounding the setpoint.

Technical characteristics

  • The A and B channels can be freely programmed via the front keys and JP1 and JP2 to current in the range 0...20 mA or voltage in the range 0...10 VDC.
  • Linearized Pt100 temperature input in the range -99...+850°C with 3-wire connection.
  • PID on/off controller with accurate setting of the regulation parameters XP (proportional band), TI (integrating time) and TD (differentiating time).
  • Functions include PI step and-band controller, dl/dt function and comparator or trip amplifier with an external setpoint.
  • 2 relay outputs with a make contact connected to a common point.
  • Relay outputs can be installed in PELV/SELV circuits.
  • Mounting for a standard 11-pole socket which can be adapted for DIN rail or plate use with PR’s 7023 adaptor and 7024 mounting keying.

Environmental Conditions

Operating temperature -20°C to +60°C
Calibration temperature 20...28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP50

Mechanical specifications

Dimensions (HxWxD) 80.5 x 35.5 x 84.5 mm (D is without pins)
Weight approx. 140 g

Common specifications

Supply

Supply voltage 19.2...28.8 VDC
Max. required power 3 W
Internal power dissipation 2.5 W

Isolation voltage

Isolation voltage, test / working 3.75 kVAC / 250 VAC
PELV/SELV IEC 61140

Response time

Response time < 60 ms
Signal / noise ratio Min. 60 dB
Signal dynamics, input 20 bit
Effect of supply voltage change < ±0.002% of span / %V
Proportional band (XP) 0.01...999%
Gain, 1/XP = 0.1...10000
Integrating time (TI) 0...999 s
Differentiating time (TD) 0...999 s
Neutral zone (nEU) 0...99.9 %
Pulse time (TP) 0.01...400 s
Min. pulse time (TP) 0.01...10 s
Auxiliary voltages: Reference voltage 2.5 VDC ±0.5% / 15 mA
Temperature coefficient < ±0.01% of span / °C
Linearity error < 0.1% of span
EMC immunity influence < ±0.5%

Input specifications

Common input specifications

Max. offset 50% of selected max. value

Current input

Measurement range 0...20 mA
Min. measurement range (span) 4 mA
Input resistance 50 Ω

Voltage input

Measurement range 0...10 VDC
Min. measurement range (span) 200 mV
Input resistance Nom. 10 MΩ

RTD input

RTD type Pt100 (2286B)
Cable resistance per wire (max.) 25 Ω
Sensor current Nom. 1.25 mA

Output specifications

Relay output

Relay functions Setpoint
Max. voltage 250 VRMS
Max. current 2 AAC
Max. AC power 500 VA
Max. load at 24 VDC 1 A
*of span = of the presently selected range

Observed authority requirements

EMC 2014/30/EU
LVD 2014/35/EU
EAC TR-CU 020/2011
Su solicitud ha sido enviada con éxito - 0 Artículos en su lista
Descripción del producto Cantidad
Por favor, indique una variante ( véase ficha) - o indicar ' Variante desconocido '
Su información de contacto
Continuar navegando
No hay productos añadidos a la lista...
No tiene productos en su lista ...

Al navegar por las páginas de productos en este sitio web , tiene usted la posibilidad de añadir productos a una lista - y enviarnos su lista, solicitando con ello una oferta .
Para agregar productos a la lista , haga clic en el botón "consiga un presupuesto rápido " en las páginas de productos.

Cuando haya enviado la lista, nos pondremos en contacto con usted lo antes posible .

Si usted no presenta la lista,será visible para usted en el sitio web durante 7 días ( vamos a colocar una "cookie" en su PC o tablet ) .

Esperamos que usted encontrará la opcion útil . Por favor, vaya a las páginas de productos para agregar productos a su lista.
Gracias por su solicitud
Nos pondremos en contacto con usted por teléfono o correo electrónico tan pronto como sea posible.